Wednesday, 3 June 2020
Wobbly venture out
Did a shop at the local Co-op, first time since 23rd March. The shop was quiet, but I was still very nervous. Just recording it here for future reading.
Tried braided necklaces/hairbands. Original pattern (not mine) goes back at least ten years They employ knitting's natural curl, which is a good point. On Knitmaster, 9 sts, hole in middle every 6 rows. Ends then drawn through the holes. As they stretch, fastening by button and loop is needed, so button can be moved up later. Now trying to calculate the length needed for a belt, over 13 sts which is a much firmer piece of work.

Sunday, 24 May 2020
Some progress made
Nominally a Bank Holiday today, and should also be the first day of our May holiday in France. With Lockdown, this isn't happening.
This is the Oddball Sweater, or as I prefer to call it, Bea's jumper, because it was Bea who first told me about it. I made Walnut'n'Wensleydale a few years ago (All the dyes from walnut leaves or husks). Cast on 80 sts or thereabouts, knit circularly, double increases every quarter, split after yoke. I am trying to use up all the remaining handspun, home dyed yarn in the attic, starting with reds at the top and progressing through the rainbow. Although no blues and purples left as they all sold. Some of the labels go back 17 years! Should be tried on around before the split to make sure is is deep enough. I put it onto threads about four inches after the split, and found it was long enough in front and back to start squaring off.
With the poor indoor light, this looks awfully like the pink poncho of the previous post!
With the poor indoor light, this looks awfully like the pink poncho of the previous post!
Monday, 11 May 2020
Pack a Poncho
Wednesday, 29 April 2020
Don't mock my smocking!
About five years ago I bought some fine silver greylinen in Brixton of all places, intending to make a full smock. Three years ago I actually cut it out. All instructions say to do the embroidery of the side panels first. I don't enjoy embroidery, especially when I have to draw the pattern first. It's got circles to represent my spinning wheel and circular sock machine. I chose linen thread which is a pest to work with, not a bit flexible. The smock is back/front reversible, but I gave up after only doing part of the front - the back can stay plain, unless I do some machine embroidery on it, which is probably sacrilege, although I full intend to sew the seams by machine anyway
I got the smoking dots - worked okay on the back piece BUT didn't like a second pressing on the front on an old dippy ironing board and half the dots aren't there. Also, I seem to have done them on the front side of the work. Put it aside with yet another sigh. Today got a board, covered it with cloth, used a brand new piece of dot paper and pressed onto the wrong side. Sewing lines in one dot, out the next and only every other line as they all seem so close together. Have done five lines. Only another 31 to go...
Also to day my have bought a 60 slot 3D printed circular sock machine from Scotland. Delivery in three months. Watch this space.
Saturday, 18 April 2020
Lockdown hat
Tuesday, 14 April 2020
Lockdown socks
Thursday, 9 April 2020
Two-yarn gloves
Subscribe to:
Posts (Atom)
